PBO钻孔应变同震响应分析     

陈燚飞  吕品姬 《大地测量与地球动力学》2019,39(7):765-770

以2017-09-08墨西哥8.1 级地震为例，分析14个PBO综合钻孔应变仪和地震仪同址记录的地震波信号，结果表明，应变仪记录的地震波符合射线传播规律。对不同震中距的站点进行基于S变换的应变仪与地震仪的同震响应特征分析，二者同震响应一致性较好，应变仪频段主要在0.25 Hz以下。取震后1 h应变数据进行分析发现，同震阶段应变主方向指向震中。  相似文献   

Dynamic characteristics of marine soft clay under variable phase difference and initial static shear stress     

Wenqian Dong  Xiuqing Hu  Hongtao Fu 《Marine Georesources & Geotechnology》2020,38(7):770-785

Abstract

Under seismic loading, the soil layer is subjected to multidirectional cyclic shear stress with different amplitudes and frequencies because of the coupling of multiple shear waves and the soil element within a slope or behind a retaining wall is subjected to initial static shear stress before subjected to cyclic loading. Due to the complexity of seismic loading propagation, a phase difference exists between the initial static shear stress and cyclic shear stress. To investigate the influence of the phase difference and initial static shear stress on cyclic shear strain, cyclic modulus, and cyclic strength, a series of laboratory tests are performed on Wenzhou marine soft clay by multi-directional simple shear system, which can simulate the actual state better by controlling the horizontal cyclic stress in the x and y directions simultaneously. As the phase difference varies from 0° to 90°, the dynamic shear modulus increases and cyclic strain accumulation decreases with an increasing number of cycles. The shear strain increases with the initial shear stress.  相似文献   

花岗岩残积土动态冲击性能的SHPB试验研究     

刘新宇  张先伟  岳好真  孔令伟  徐超 《岩土力学》2020,41(6):2001-2008

为研究花岗岩残积土的动态冲击性能，开展了高速冲击下的分离式霍普金森压杆（SHPB）试验，与常规应变率下的试验结果比较，分析了高应变率对花岗岩残积土的应力?应变特性和强度的影响。结果表明：低、高应变率下的花岗岩残积土的?-?a（轴向应力?轴向应变）曲线均呈现出软化型。随着应变率 增加，?-?a曲线向?a增大的方向移动，破坏应变?af增加。但高应变率下?af增加的程度更加明显。花岗岩残积土的峰值强度普遍具有应变率依赖性，二者可用直线关系拟合，但低、高应变率下的拟合关系并不一致。提出了率敏性因子m定量评价依赖性强弱。研究发现，随着应变率的提高，强度的应变率依赖性减弱，低应变率下的m为26.694，而高应变率下仅为0.013。相关试验结果指出，高速冲击荷载对土体总体有害。工程中应该采取合理措施控制冲击荷载的危害。该研究有助于深化花岗岩残积土动态冲击性能的理解，为相关工程的施工与设计提供技术参考。  相似文献   

多功能水合物沉积物三轴试验系统的研制与应用     

周家作  韦昌富  魏厚振  杨周洁  李力昕  李彦龙  丁根荣 《岩土力学》2020,41(1):342-352

研制了新型多功能水合物沉积物三轴试验系统，系统由供-排气模块、应力加载模块、温控模块、数据采集模块和辅助模块组成。利用泵驱动高压液体施加围压和轴压，加载方式有恒压、恒流、梯度增压、跟踪气压模式，可以实现不同条件下的水合物合成、三轴剪切。围压跟踪气压的功能使水合物生成过程中净围压不变，保证了试样初始条件一致性。根据围压液体积变化测量试样体积变形，通过设置回压泵压力变化方式控制水合物气压，可以模拟不同降压速率条件下的水合物沉积物分解变形。以泥质粉细砂和二氧化碳为材料制作了三轴试样，进行了水合物合成、三轴剪切和降压分解试验，检验了仪器的可靠性。  相似文献   

New formulae for capacity energy-based assessment of liquefaction triggering     

Yasaman Jafariavval 《Marine Georesources & Geotechnology》2020,38(2):214-222

Abstract

Liquefaction of loose saturated soil deposits is a hazardous type of ground failure occurring under earthquake excitations. Therefore, an accurate estimation of liquefaction potential is extremely important in geotechnical engineering. In the current study, a new model is proposed which estimates the level of strain energy needed for liquefaction initiation. A compiled database containing cyclic tests gathered from previously published works was used to develop new models to predict liquefaction potential. M5′ algorithm was used to find the best correlation between parameters. It was shown that not only the derived formulas are acceptably accurate but also they feature a very simple structure in comparison with available formulas in the literature. The proposed equations are accurate, physically sound and uncomplicated. Furthermore, safety factors were given for different levels of risk, which can be useful for engineering practice. In addition, the influence of different predictors on the liquefaction potential was evaluated and also the significance of input variables was assessed via sensitivity analysis. Finally, a new model was introduced for preliminary estimation of liquefaction potential.  相似文献   

青岛台体应变短周期气压系数变化原因探讨     

岳龙  徐清风  臧艺博  李志强  刘云  李炜  孙忠礼 《大地测量与地球动力学》2020,40(7):765-770

青岛台体应变短周期(小于128 min)气压系数2018-01出现阶变，通过对观测系统、台站周边施工情况、监测环境等逐项现场核实，排除观测系统、周边施工的影响。利用离散小波变换和回归分析发现，钻孔水位的气压系数与体应变气压系数同步阶变，结合台站钻孔施工当天体应变钻孔水位变化、体应变趋势变化、其他相邻台站水位气压系数变化等数据认为，台站钻孔施工是导致体应变气压系数变化的原因，并定性分析其变化机理。  相似文献   

北部湾地区海砂填料的动力特性分析     

王家全  陈胜前  唐毅  黄世斌  黄钦政 《海洋工程》2020,38(5):149-155

为研究北部湾地区海砂填料的动力特性，采用高级动态三轴测试系统开展循环荷载下的动三轴试验，研究不同围压及不同动应力幅值对海砂动力特性的影响规律。试验结果表明：轴向累计应变随围压增加而减小，围压150 kPa时振次10 000后应变仅为3%；随着动应力幅值的增大轴向累积应变随之增大，且达到破坏标准的时间越短。动弹性模量随着动应力幅值和围压的增加而增大，不同围压下动弹性模量随动应变的增加出现先骤减再略减后稳定的发展趋势，ε_d>0.3%后开始趋于稳定；不同动应力幅值下动弹性模量出现先增后减直至稳定的趋势，其中动应力幅值对动弹性模量有明显的影响，围压影响相对较小。孔压比随动应力幅值增加而减小，随围压增加而增加。  相似文献   

级配碎石填料大三轴试验及累积塑性应变预测模型     

杨志浩  岳祖润  冯怀平  叶朝良  马德良 《岩土力学》2020,41(9):2993-3002

级配碎石作为重载铁路基床表层的主要填料，其受列车荷载的影响最大。因此，研究级配碎石在循环荷载作用下的动力行为及累积塑性应变演化特征变得尤为重要。首先，通过制备不同细粒含量的级配碎石填料，开展一系列大型动三轴试验，探究细粒含量、围压及动应力幅值对循环荷载作用下试样累积塑性应变的耦合影响机制。其次，基于塑性安定理论，确定不同应力水平下试样的动力行为，得到考虑围压及细粒含量参数的塑性蠕变状态临界动应力计算模型。最后，结合试验数据，建立考虑应力水平及细粒含量参数的塑性蠕变动力行为累积塑性应变预测模型，并明确各参数的物理意义。其研究成果可为既有重载铁路路基健康状态评估及考虑强度、变形综合控制的路基结构设计提供参考。  相似文献   

A novel coupled FDM-DEM modelling method for flexible membrane boundary in laboratory tests     

Hua-Xiang Zhu  Zhen-Yu Yin  Qiang Zhang 《国际地质力学数值与分析法杂志》2020,44(3):389-404

Difficulties are involved in discrete element method (DEM) modelling of the flexible boundary, that is, the membranes covering the soil sample, which can be commonly found in contemporary laboratory soil tests. In this paper, a novel method is proposed wherein the finite difference method (FDM) and DEM are coupled to simulate the rubber membrane and soil body, respectively. Numerical plane strain and triaxial tests, served by the flexible membrane, are implemented and analysed later. The effect of the membrane modulus on the measurement accuracy is considered, with analytical formulae derived to judge the significance of this effect. Based on an analysis of stress-strain responses and the grain rotation field, the mechanical performances produced by the flexible and rigid lateral boundaries are compared for the plane strain test. The results show that (1) the effect of the membrane on the test result becomes more significant at larger strain level because the membrane applies additional lateral confining pressure to the soil body; (2) the tested models reproduce typical stress and volumetric paths for specimens with shear bands; (3) for the plane strain test, the rigid lateral boundary derives a much higher peak strength and larger bulk dilatation, but a similar residual strength, compared with the flexible boundary. The latter produces a more uniform (or ‘diffuse') rotation field and more mobilised local kinematics than does the former. All simulations show that the proposed FDM-DEM coupling method is able to simulate laboratory tests with a flexible boundary membrane.  相似文献   

Modelling the time‐dependent behaviour of granular material with hypoplasticity          下载免费PDF全文

Shun Wang  Wei Wu  Zhen‐Yu Yin  Chong Peng  Xuzhen He 《国际地质力学数值与分析法杂志》2018,42(12):1331-1345

This paper presents a constitutive model for time‐dependent behaviour of granular material. The model consists of 2 parts representing the inviscid and viscous behaviour of granular materials. The inviscid part is a rate‐independent hypoplastic constitutive model. The viscous part is represented by a rheological model, which contains a high‐order term denoting the strain acceleration. The proposed model is validated by simulating some element tests on granular soils. Our model is able to model not only the non‐isotach behaviour but also the 3 creep stages, namely, primary, secondary, and tertiary creep, in a unified way.  相似文献